Allied Bolt Inc.

PRESS RELEASE PRESS RELEASE PRESS RELEASE

Garden City, N.Y., June. 1, 2007 – Allied Bolt Inc, a New York based manufacturer of Outside Plant Hardware, proudly announces its new line of specialized Pole Steps for use on Fiberglass and Composite Utility Poles. In keeping with long- standing configurations used on wood utility poles, Allied Bolt’s new Pole Steps for Fiberglass and Composite Utility Poles appear very similar in design with some modifications.

Peter Wang, Engineering Director for Allied Bolt, says, “The new line fills a void in the growing market of outfitting Fiberglass Utility Poles. There are currently not many companies developing new outside plant products, yet alone products that fill such a small niche market.”

The line of Fiberglass Pole Steps is easily installed with a Linesman Wrench and a power drill equipped with a special Fiberglass Drill Bit. Peter Wang says, “This new collection of Pole Steps responds to requests from many telecommunication and utility providers for a safe and easy to install system for Fiberglass Poles. Many installers have used lip mounted devises that are less secure and can be quite hazardous.”

The collection is divided into three different models. Each model is equipped with all the hardware necessary for installation.

The three models are: The Working Pole Step, The Detachable Pole Step Mount, and the Machine Bolt Style Pole Step.

The Working Pole Step
This Step provides linesmen with opposing 5-3/4” standoffs for standing in place. The Step has Flanges with welded pins to prevent rotation. A drilling template is provided for easing installation.

The Detachable Pole Step Mount
This Mount provides a secure mount for standard Detachable Pole Steps. The Mount is easily installed by tightening nuts on opposite side of pole. Each Mount is equipped with a stamped plate, special headed bolt, round washer, and two nuts to prevent loosening over time.

Machine Bolt Style Pole Step
This Step is used in lieu of the Spike Head Pole Step on Fiberglass Poles. The Step is installed Each Step is equipped with a welded washer to work as a stop, one loose round washer, and two nuts to prevent loosening over time. The Step provides a 5-3/4” offset from the pole.

Contact an Allied Bolt distributor or local representative for more information.

Tags: allied bolt distributer, Allied Bolt Inc, composite utility poles, detachable pole step mount, drill bit, fiberglass utility pole steps, fiberglass utility poles, linesman wrench, machine bolt style pole step, poutside plant hardware, powerr drill, Press Release, Utility Pole Steps, utility poles, working step pole

 

Allied Bolt Inc carries a full line of DISH Network and Directv approved Grounding Hardware, Anchors and Fasteners, Tools and accessories.  We stock a large inventory of hardware and our inventory changes  to meet the needs of the industry so check back often.

B Ground Wire Clamps Part# 9050

• Used to secure #6 AWG through #12 AWG ground wire runs.
• Stamped from AISI 1018 Steel.
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• 7/32″ Screw hole (accommodates #8 – #12 Screws).
• Manufactured in the United States.

D Plastic Anchor Kit | Drill Bit

Supplied in high quality unbreakable clear plastic box that is divided into two compartments.

This DISH Network and Directv approved Kit contains:

• 126PXX (100) D10 Plastic Anchors
  (100) #8 x 1″ Combo Pan Tapping Screws
  (1) 3/16″ x 4″ Masonry Drill Bit
• 126HXX (100) D10 Plastic Anchors
  (100) #8 x 1″ Slot Hex Tapping Screws
  (1) 3/16″ x 4″ Masonry Drill Bit
• 126HPS (100) D10 Plastic Anchors
  (100) #8 x 1″ Combo Hex Tapping Screws
  (1) 3/16″ x 4″ Masonry Drill Bit
• 127PXX (100) D12 Plastic Anchors
  (100) #10 x 1″ Combo Pan Tapping Screws
  (1) 1/4″ x 4″ Masonry Drill Bit
• 127HXX (100) D12 Plastic Anchors
  (100) #10 x 1″ Slot Hex Tapping Screws
  (1) 1/4″ x 4″ Masonry Drill Bit
• 127HPS (100) D12 Plastic Anchors
  (100) #10 x 1″ Combo Hex Tapping Screws
  (1) 1/4″ x 4″ Masonry Drill Bit
• 128PXX (50) D16 Plastic Anchors
  (50) #12 x 11?4″ Combo Pan Tapping Screws
  (1) 5/16″ x 4″ Masonry Drill Bit
• 128HXX (50) D16 Plastic Anchors
  (50) #12 x 11?4″ Slot Hex Tapping Screws
  (1) 5/16″ x 4″ Masonry Drill Bit
• 128HPS (50) D16 Plastic Anchors
  (50) #12 x 11?4″ Combo Hex Tapping Screws
  (1) 5/16″ x 4″ Masonry Drill Bit

Tags: 1018 steel, anchor kit, awg, bolt, clamps, d10, d12, d16, Directv, DISH Network, Fasteners, hex, inventory changes, masonry drill bit, masonry products, network hardware, plastic anchors, screw hole, stock, tapping screws